Just so happen to have an OptiPlex 9020 here in the shop (for SSD install and Windows-10 Pro-64 Upgrade). Runs great. Getting ready to take-back and re-install.
BIOS is A01. UEFI-Mode.
4gb x 2 DIMMs. Shows as Slot-1 and Slot-2 in BIOS.
No ePSA doesn't catch everything.
Try both DIMMs as singles in Slot-1.
Video Card can be removed and run on-board VGA to simplify config while trouble-shooting.
Tesla1856
8 Wizard
•
17.4K Posts
0
March 21st, 2018 11:00
Just so happen to have an OptiPlex 9020 here in the shop (for SSD install and Windows-10 Pro-64 Upgrade). Runs great. Getting ready to take-back and re-install.
BIOS is A01. UEFI-Mode.
4gb x 2 DIMMs. Shows as Slot-1 and Slot-2 in BIOS.
No ePSA doesn't catch everything.
Try both DIMMs as singles in Slot-1.
Video Card can be removed and run on-board VGA to simplify config while trouble-shooting.
elpro999dell
367 Posts
0
March 22nd, 2018 17:00
Try running the RAM you take out alone,
If the machine does not boot then you just found out that RAM no longer works