Unsolved
This post is more than 5 years old
1 Message
0
16196
June 19th, 2010 10:00
2650 DRAC III Reset
I recently bought a second hand Poweredge 2650 with a DRAC III installed.
Idon´t know password to access via the web. How I can reset the configuration? Is there a jumper on the motherboard?
My system OS is Centos 5.5
I´ve tried this:
#omconfig chassis bmc config=settodefault
Error! This function has either failed or is not supported on this system.
Any Idea?
0 events found
No Events found!
theflash1932
11 Legend
•
16.3K Posts
0
June 19th, 2010 15:00
It probably requires DRAC Tools or OMSA to be installed.
theflash1932
11 Legend
•
16.3K Posts
0
June 19th, 2010 15:00
I don't know if the regular RACADM commands work on the DRACIII or are the same from a linux command line, but for other DRAC's, the command to reset to default is:
RACADM RACRESETCFG
Then, to set new settings:
RACADM SETNICCFG -S IPADDRESS SUBNETMASK GATEWAY