Unsolved
This post is more than 5 years old
1 Message
0
25267
June 2nd, 2014 07:00
blade m610 memory upgrade
i have poweredge blade server m610, it has 64 (4 slots, each slot 8 GB), i want to upgrade it to 92 GB so i purchased new 64 GB (4 dims each dim 16 GB) so how can i redistribute it on the memory slots (A1,A2,....)
0 events found
No Events found!
DELL-Chris H
7 Practitioner
•
9.7K Posts
1
June 2nd, 2014 08:00
Palestine,
What you will need to do is verify in the BIOS that the memory mode is set to Advanced ECC. Then from there you need to make sure that all three channels are populated identically.
So looking at the diagram above you can see the channel layout. So you would need to populate the following with the 16gb dimms (A2, A3, B2, and B3) then the 8gb dimms in (A5, A6, B5 and B6.)
Then boot the server.
Let me know if this helps.