Bootutil for DELL PRO/1000 PT C57721

Question

I am looking for bootutil for NIC PRO/1000 PT C57721. When I use the Intel program, an error appears: ERROR: Flash too small for the image.

PS C:\Intel23.2\APPS\BootUtil\winx64> .\bootutilw64e -IV

Intel(R) Ethernet Flash Firmware Utility
BootUtil version 1.6.59.0
Copyright (C) 2003-2017 Intel Corporation

Image versions in BootIMG.FLB

    Combo Image Version Name 1.1927.0

    Combo Rules                    v4.68.00
    Clp-Loader Option ROM          v3.0.90
    40G Interface Module           v1.0.53
    iSCSI Option ROM               v3.1.30
    iSCSI Setup Option ROM         v3.1.30
    FCoE Option ROM                v1.8.29
    Intel(R) Boot Agent FE         v4.2.08
    Intel(R) Boot Agent GE         v1.5.86
    Intel(R) Boot Agent XE         v2.4.19
    Intel(R) Boot Agent XE (X550)  v2.4.19
    Intel(R) Boot Agent I40E       v1.0.66
    Intel(R) Boot Agent CL         v0.1.13
    UEFI x64 PCI gigabit driver    v3.5.22
    UEFI x64 PCI-E gigabit driver  v8.3.10
    UEFI x64 10 gigabit driver     v6.7.10
    UEFI x64 40 gigabit driver     v3.0.11
    UEFI IA64 PCI gigabit driver   v3.5.22
    UEFI IA64 PCI-E gigabit driver v8.3.10
    UEFI IA64 10 gigabit driver    v6.7.10
    UEFI IA64 40 gigabit driver    v3.0.11
    OCD Option ROM                 v0.9.04
    UEFI x64 FCoE Driver           v1.2.21

Port Network Address Location Series  WOL Flash Firmware                Version
==== =============== ======== ======= === ============================= =======
  1   001517A767BE     2:00.0 Gigabit NO  PXE                           1.5.86
  2   001517A767BF     2:00.1 Gigabit N/A PXE                           1.5.86
PS C:\Intel23.2\APPS\BootUtil\winx64> .\bootutilw64e -up=iSCSI -nic=1

Intel(R) Ethernet Flash Firmware Utility
BootUtil version 1.6.59.0
Copyright (C) 2003-2017 Intel Corporation
ERROR: Flash too small for the image

Daniel My · Answer

Hello

That part number doesn't pull up anything for me. Can you check the card for any other numbers. Any downloads we have for the card will likely be listed on the download page for a system it was sold with.

Thanks

Daniel My · Answer

The part number is X3959. One of the servers it is validated for is the T710. If you go to the support page of a T710 you will find the available downloads under the network section. I checked the version 16.0.0 of the Intel DOS utility and it contains bootutil.

Piotrf · Answer

Thank you for the information.

There is no BootIMG.FLB in the Intel_LAN_16.0.0_DOSUtilities_A00.exe file. :(

I made changes with Intel_LAN_14.5.1_DOSUtilities_A00.exe. Maybe it is possibele with Intel_LAN_15.0.0_DOSUtilities_A00.exe too.

I used "refus" to prepare a pendrive with DOS and tools.

It works. Thank you.

PowerEdge Hardware General

Bootutil for DELL PRO/1000 PT C57721

Was this post helpful?