This post is more than 5 years old
2 Intern
•
743 Posts
0
35270
July 3rd, 2013 16:00
Chassis Asset Tag
Hi,
On the first page of a Chassis view, under Windows, the following is displayed
How can the contents of the Asset Tag field be changed?
Thx
John Bradshaw
No Events found!
Daniel My
10 Elder
•
6.2K Posts
1
July 3rd, 2013 18:00
I don't think non-blade servers have asset tags to configure, so this command appears to be blade only.
The -m switch designates the module you want to configure. If you do not specify the module then it will assume you want to program the chassis. To change a specific blade server you will specify the module with -m server-4 where the number 4 is replaced with the server number you want to set. You can read more about this in the iDRAC CLI guide:
http://ftp.dell.com/Manuals/all-products/esuprt_electronics/esuprt_software/esuprt_remote_ent_sys_mgmt/integrated-dell-remote-access-cntrllr-7-v1.30.30_Reference%20Guide_en-us.pdf
Thanks
Daniel My
10 Elder
•
6.2K Posts
0
July 3rd, 2013 17:00
Hello John
This command should change it, just substitute the ?s with your desired tag:
racadm setassettag -m chassis ??????
Thanks
bradje1
2 Intern
•
743 Posts
0
July 3rd, 2013 17:00
Excellent! Thx Daniel.
Is there a separate syntax for Blades and Standalone boxes like R820's?
John Bradshaw
bradje1
2 Intern
•
743 Posts
0
July 3rd, 2013 18:00
Thx again Daniel
JB