Unsolved
This post is more than 5 years old
4 Posts
0
20978
January 22nd, 2010 12:00
Controller PERC 4e/Si Driver Version problem
I cant find the version 4e/Si 6.46.2.32 or higher for the PowerEdge 1850 on the download driver section.
Does anyone know where to get this version or higher ?
Looking forward for a response.
Raptor
0 events found
No Events found!
theflash1932
11 Legend
•
16.3K Posts
0
January 22nd, 2010 13:00
Below is the "hard drive" version of the driver. This is suitable for loading on floppy and using at the F6 prompt to load the RAID drivers for OS install. If you go to support.dell.com and enter your Service Tag or model, you will see all available drivers/firmware for your system (although it is running slow right now). The same driver is used for all PERC 4's and some PERC 3's. This is the latest version. What are you trying to do - if you don't mind my asking the context of your question :)?
ftp://ftp.dell.com/ide/perc-cerc-w2k3-6.46.2.32-A05.exe
Raptornl23
4 Posts
0
January 23rd, 2010 01:00
When i press f6 and go to S and inserted my floppy and hitting enter it says : "file txtsetup.oem caused an unexpected error 4100 at line 1896 in d:\nt\base\boot\setup\oemdisk.c
Raptornl23
4 Posts
0
January 23rd, 2010 11:00
I have tryed many and formatted them it any other suggestions ?
theflash1932
11 Legend
•
16.3K Posts
0
January 23rd, 2010 11:00
That is a problem (most likely) with the floppy. Try it again, formatting if it still doesn't work. If you have another floppy, try that. Don't you love floppies?!
Raptornl23
4 Posts
0
January 24th, 2010 11:00
But to install the raid drivers do you need to reinstall windows ?
theflash1932
11 Legend
•
16.3K Posts
0
January 24th, 2010 11:00
That is why I asked what you are trying to do - why do you need the driver - what are you trying to do? Are you updating an existing driver or are you installing Windows?
Probably have bad floppies or drive (if you are installing Windows) - also possible your download/extract was corrupt.