Server doesn't boot at all, it is stuck on configuring idrac then fails and reboots. It doesn't go to post step. I only can see blinking amber button at back of server and in front screen is off only info button glows blue. On screen I can see Configuring memory..Done --> Configuring Idrac..Alert Idrac failed.. rebooting, and this loop continues over and over. Can't go to IDrac configuration or bios. And I tried your solution with power button, it didn't work, still same problem.
I managed to update bios to 2.4.2 version. And i forgot to mention that server deosn't detect raid controler.
I get message "PCIe Training error: slot 4". Tried switching slots still same. This message doesn't show up every 2nd time. Server service tag xxxx ( Tag removed by moderator due to security reasons). I made DESET report.
Lapinas
1 Rookie
•
34 Posts
0
September 13th, 2016 00:00
Server doesn't boot at all, it is stuck on configuring idrac then fails and reboots. It doesn't go to post step. I only can see blinking amber button at back of server and in front screen is off only info button glows blue. On screen I can see Configuring memory..Done --> Configuring Idrac..Alert Idrac failed.. rebooting, and this loop continues over and over. Can't go to IDrac configuration or bios. And I tried your solution with power button, it didn't work, still same problem.
Lapinas
1 Rookie
•
34 Posts
0
September 13th, 2016 02:00
Now I can access server bios after 3 reboots. Now i get IDrac swc0700 error and life cycle controler disabled.
Lapinas
1 Rookie
•
34 Posts
0
September 13th, 2016 04:00
I managed to update bios to 2.4.2 version. And i forgot to mention that server deosn't detect raid controler.
I get message "PCIe Training error: slot 4". Tried switching slots still same. This message doesn't show up every 2nd time. Server service tag xxxx ( Tag removed by moderator due to security reasons). I made DESET report.