Drivers for PowerEdge SC1600 built-in SCSI Controller.

Question

Hi,   Does anyone know where can I find the DOS and Windows Server 2000/2003 drivers for the built-in SCSI controller card for the SC1600?   I need these drivers to be able to initialize the card from dos boot disk or Windows PE Environment (for disk imaging purposes).   Thank you for your consideration of this issue.   Regards, Brcobrem

Brcobrem · Answer

Hi again,   I forgot to mention that Windows 2000 Server's Device Manager says it is a Perc4/im controller ('im', like Ingrid Mary).   I could not finf that controller in the Dell download area.   Regards, Brcobrem

Protholl · Answer

I found the NT driver here for the on-board LSI logic SCSI controller. They list a DOS driver as well.

http://www.lsilogic.com/downloads/selectDownload.do

Under the drop down "Select a Specific Product"
choose "LSIU320"

This worked for me but as always YMMV =)

Protholl

PowerEdge Hardware General

Drivers for PowerEdge SC1600 built-in SCSI Controller.

Was this post helpful?