Unsolved
This post is more than 5 years old
7 Posts
0
10989
May 30th, 2003 17:00
How to replace & setup failed PE4300 RAID hard drive
One of the 4 HDs on my PE4300 RAID is failed. I have a new replacement ready. I like to know the steps on how to configure the new HD to replace the failed one. My PE4300 is running Win2k server sp3 & SQL server 2000.
Thanks,
James
No Events found!
mrdat
250 Posts
0
June 1st, 2003 15:00
Honestly, the best thing to do with failed raids is to speak with one of their techs so they have walk you through it... Great thing is that they are 24/hr.
DKP
25 Posts
0
June 4th, 2003 18:00
If you had a Raid 5/1/10 it would rebuild automatically depending on Controller/settings.
If not you should be able to start a rebuild from Array manager also
kd6ovv
7 Posts
0
March 9th, 2004 00:00
drive 2 in my 4 drives RAID 5 setup failed. I replaced with a new drive. After startup, system still telling me drive 2 failed and orange light on drive 2 is on. What could be the problem. Looking for some advise.
Thanks,
James
kd6ovv
7 Posts
0
March 9th, 2004 00:00