Unsolved
This post is more than 5 years old
5 Posts
0
846
September 16th, 2019 17:00
Idrac6 does not respond
The idrac6 in my r710 does not respond to pings and I cannot use it through web browser. Can anyone help?
0 events found
No Events found!
Unsolved
This post is more than 5 years old
5 Posts
0
846
September 16th, 2019 17:00
0 events found
Top
DELL-Chris H
Moderator
•
9.7K Posts
0
September 17th, 2019 05:00
OriginalRobonut5,
Would you clarify a couple things for me?
Do you have local access to the system, or only remote?
Is this an iDrac6 Enterprise or Idrac Express?
With local access, access the iDrac on startup (F10) and verify what the NIC is set at, either Dedicated or Shared, or another variant of those two?
Lastly, what port is the network cable connected to for the iDrac?
Let me know.
Originalrobonut5
5 Posts
0
September 17th, 2019 14:00
Originalrobonut5
5 Posts
0
September 17th, 2019 15:00
Do you know if it is possible to run idrac6 through pcie wireless card
DELL-Chris H
Moderator
•
9.7K Posts
0
September 18th, 2019 08:00
Do you know if you have the Express or Enterprise license for the iDrac, I ask as the Dedicated network port on the iDrac is only available with the Enterprise license. If you have the Express you will need to set that to Shared, and also move the cable to LOM 1.