Unsolved
This post is more than 5 years old
7 Posts
0
68500
February 2nd, 2016 13:00
Installing OS/Power Edge R730
Hello
Just starting to setup my R730 with raid 6 configuration and now looking to install Server 2012. I went into the lifecycle controller and selected "deploy OS" but I get an error of not having an optical drive. How can I load this from my USB jump drive? I don't see an option to choose that.
Thanks in advance
Warren83
No Events found!
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.4K Points
0
February 2nd, 2016 15:00
Hi,
You need to map the iso to virtual media. http://www.dell.com/support/article/us/en/04/SLN129177?c=us&l=en&s=bsd&cs=04
warren83
7 Posts
0
February 2nd, 2016 18:00
Thanks Josh
For some reason the videos are not working.
Alison Santos
18 Posts
0
February 3rd, 2016 17:00
The problem is the media that you are using que does not contain the generic driver for the CD / DVD-ROM drive, try another or USB Device
Make sure In the System BIOS> Integrated Devices / USB 3.0 Settings is Disabled, why the doors may stop working during the installation procedure, after enable again if necessary
If you have the iDRAC Enterprise, will be able to perform remote installation through Virtual Media.
iDRAC Configuration Initial Setup
www.youtube.com/watch