M1000e C2700A-S0 PSU

Question

Hello Community,

I'm trying to switch on the Power supply outside a chassis for testing purposes. I cannot find the pinout information for the 3 x 8 connector. I need access to: PS_KILL, PS_ON, RETURN Logic,+12V_Rtn_Sense,+3.3V Standby. I had expected this to be more like the 4 x 6 connector for which there is much information. Can anyone help with this?

thanks

DELL-Young E · Answer

Hi, thank you for choosing Dell. I regret to tell you we have no such information. We do not have the details of the power supply input/output ports in depth. We could wait on other contributors to chip in. If you have any further questions, let us know and have a good day.

Robert5Miller · Answer

thanks for the response but I shall wait to see if more info turns up. It is a surprise as other servers that use the 4 x 6 pin configuration are well covered, but they aren't any longer readily available.

jqosmio · Answer

I can tell you to search for dell a2360 or z2360p pinout , you find info what pin connection is needed to make the fan working and psu to be on with 196.7A output on 12 Volt, I am looking to raise the voltage to 13.8 in case you find out please post, tnx

Custom8e · Answer

@jqosmio​ if you ever find out any info, please let me know too.  I’m wanting to use one of these as a bench power supply for testing car audio stereos/amps/etc. The high amperage and 13.8 vdc would be perfect.

Ariel guafa · Answer

Yo tengo la Fuente de alimentación conmutada Dell C2700A-50 1350 W/2700 W 0CF4W2 80+ platino al parecer no hay nada de esta pero es al misma que publican lo tratare de hacer hoy y haber que pasa... Pregunta sabrán si si podra levantar mas voltaje.

PowerEdge Hardware General

M1000e C2700A-S0 PSU

Was this post helpful?