Unsolved
This post is more than 5 years old
3 Posts
0
5059
April 23rd, 2004 18:00
Network Card showing errors. Please help
eth0 Link encap:Ethernet HWaddr 00:0B:DB:93:FF:50
inet addr:216.254.xxx.xxx Bcast:216.254.xxx.xxx Mask:255.255.255.240
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12802074 errors:0 dropped:0 overruns:0 frame:0
TX packets:15938751 errors:106811 dropped:0 overruns:0 carrier:106811
collisions:165752 txqueuelen:100
RX bytes:2690692629 (2566.0 Mb) TX bytes:3390726538 (3233.6 Mb)
Interrupt:7 Memory:feb60000-feb80000
I am running Redhat Linux 7.3
Message Edited by m00di on 04-23-2004 02:35 PM
No Events found!
sentinel-master
345 Posts
0
April 26th, 2004 09:00
Looks like you have a duplex issue - with so many collisions and TX errors.............check that your NIC configuration is the same as your network switch configuration for duplex mode
I.e. NIC DUplex = Switch Duplex....................Full or Half
m00di
3 Posts
0
April 26th, 2004 18:00
Hi
Thanks for the reply,
How do i find out what speed the network card it set to in linux?
How do i change it ?
The switch its connected to is 100 Full Duplex.
Thanks