PE2400 Boot Order Problem

Question

I have a PowerEdge 2400 (BIOS A09). It appears as though the Intel PXE and CDROM are getting switched in the Boot Order. I have it set to: Floppy, CDROM, Drive C: and I have the Intel PXE on the exclusion list. After rebooting, it boots off the CDROM fine. However, when I reboot again to boot off the HDDs, it attempts to boot from the Intel PXE. Going back to the BIOS, the Boot Order has changed to Floppy, Intel PXE, Drive C: and the CDROM is in the exlusion.

krisnikk02 · Answer

hi!     Try disabling the PXE boot option from integrated devices as a test.

PowerEdge Hardware General

Was this post helpful?