Unsolved
This post is more than 5 years old
6 Posts
0
5023
February 2nd, 2011 01:00
PE2950 III add extra memory
Hi All,
We have PE2950 III, and need to upgrade the memory to 8Gb , Right now the memory is
4GB (4x1024), DDR-2 533MHz ECC 2R Fully-Buffered Memory.
As in the market we hard to find DDR-2 533 Mhz, is that possible if we put the existing memory with 4GB (4x1024) DDR-2 667 Mhz ECC 1R Fully-Buffered Memory
Thanks in Advanced
Budiono
No Events found!
Dev Mgr
6 Operator
•
9.3K Posts
0
February 2nd, 2011 06:00
The speed of the memory will automatically go down to the 533MHz, so 667 memory should work just fine.
Do keep in mind to buy memory from a company that guarantees compatibility with this server (e.g. Crucial.com, Kingston.com, Dell.com have memory configurators that will guide you to memory that they guarantee to be compatible with this specific system).
oensatu
6 Posts
0
February 7th, 2011 23:00
Thanks you for reply .
Since we hard to get memory with 4x1024GB 667Mhz .
It is possible if we combined existing memory with 4x4Gb (http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&s=dhs&cs=19&sku=A2257233&mfgpid=193378&~ck=baynoteSearch&baynote_bnrank=0&baynote_irrank=0#Overview)
FYI : our server memory specs. is
4x1024Gb 533 Mhz ECC2 FullBuffer
Dell 2950 III
Thanks and Regards
Budiono