Unsolved
This post is more than 5 years old
1 Message
0
8327
December 10th, 2001 14:00
PowerEdge 300 cannot boot with changed processor.
The original P550 processor on the Dell Poweredge 300 has been removed and lost.
When stating up, after "press F2" etc I get a half-second long beep and the error message: Processor or Termination card not installed. System Halted!
I have tried with known good PIII chips, and a variety of memory. Always the same message.
Please can you help!?
Alan
When stating up, after "press F2" etc I get a half-second long beep and the error message: Processor or Termination card not installed. System Halted!
I have tried with known good PIII chips, and a variety of memory. Always the same message.
Please can you help!?
Alan
0 events found
No Events found!
DELL-Mark A
2 Intern
•
2.5K Posts
0
December 13th, 2001 14:00
The PowerEdge 300 has only been sold with 800 and 850Mhz PIII processors running at 100MHz FSB.
Any other flavors of the PIII will probably not work.
Mark Ables __________ Dell|Talk Moderator
Dell PowerEdge Server E-support and Services
____Please include a Service Tag Number in _____
____all posts for the most accurate response.____
rasta47
2 Posts
0
July 6th, 2007 18:00