Unsolved
1 Rookie
•
3 Posts
0
460
November 20th, 2023 15:48
PowerEdge R610 - Memory Upgrade
Hi All
Am trying to setup a home lab with 3 R610s. The servers came with 8G * 4 on each and I ordered 12* 16G separately. Now I removed all the 8G on three servers, added 12*8G and it is fine. On another server I installed 6 16G on A1, A2, A3 and B1, B2, B3 basically all whites and it shows 96G fine. On the third when I do, I get MEMBIST failure and DIMM A3 is disabled by BIOS and shows only 80G. I tried swapping the memory still no luck. Anything that I am doing wrong here?
No Events found!
DELL-Young E
Moderator
•
5.4K Posts
•
37 Points
0
November 20th, 2023 23:02
Hello thanks for choosing Dell.
https://dell.to/3sL2fib
page 116
System Memory
Your system supports DDR3 registered DIMMs (RDIMMs) or unbuffered
ECC DIMMs (UDIMMs). Single and dual-rank DIMMs can be 1067- or
1333-MHz, and quad-rank DIMMs can be 1067-MHz.
The system contains 12 memory sockets split into two sets of six sockets, one
set per each processor. Each six-socket set is organized into three channels of
two memory sockets per channel. The first socket of each channel is marked
with white release levers.
The maximum memory that is supported on your system varies according to
the types and sizes of memory modules being used:
• RDIMMs of sizes 2-GB, 4-GB, and 8-GB are supported for a total of up
to 96 GB.
• 1-GB and 2-GB UDIMMs are supported for a total of up to 24 GB.