PowerEdge SC440 - Memory Specs

Question

I have tried 2 types of Corsair memory but both give error messages and computer will not launch into system setup/post. Bios will not allow change to any memory settings. I understand SC 440 can use either ECC or Non - ECC memory but not mixed. Any suggestions why this memory is not recognized?   CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model TWIN2X2048-6400C5DHX   http://www.corsair.com/_datasheets/TWIN2X2048-6400C5DHX.pdf   and   CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model TWIN2X2048-6400     http://www.corsair.com/_datasheets/TWIN2X2048-6400.pdf   Computer Specs PowerEdge SC440 Pentium E2160 DC W2.3k

vfclists · Answer

Have you tried getting something from Crucial or from Dell directly. At least if the upgrade doesn't work, you have more suitable people to complain to.

Dennis Smith · Answer

dyfi,   The 440 only supports EEC memory.  If you have Non-ECC it will not work.

PowerEdge Hardware General

Was this post helpful?