This post is more than 5 years old
2 Posts
0
14519
PowerEdge T110 vmware esxi 5 compatibility
good morning
i must install a little server in vmware esxi
i think to use a PowerEdge T110 with cpu Intel Xeon E3-1220 , 8GB Memory , hd 2TB, SATA ( no raid), lan 2TB, SATA ( 3 nic)
can i use this in vmware esxi 5 ( free edition) or there are compatibilty problem ?
thanks Alberto
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
March 20th, 2012 09:00
It does show to be supported on VMWARE HCL.
www.vmware.com/.../detail.php
Thanks
tommo666
1.2K Posts
0
March 17th, 2012 07:00
Yes, it should work. The 110 supports virtualisation. Needs to be enabled in the bios under processor settings.
AlbertoDell
2 Posts
0
March 20th, 2012 23:00
thanks for reply
can i put into this server 3 lan card ?
thanks again Alberto
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
March 21st, 2012 07:00
The T110 ii has the following slots.
Slots
• 4 PCIe G2 slots:
Two x8 slots (one with x16 connectors)
One x4 slot (with x8 connector)
One x1 slot
I am not sure how your server is configured, so you would need to check and see how many and which slots are open. Then you can populate those slots with LAN cards that correspond with the slot type. So yes, if you have enough slots open, and LAN cards that will fit those slots and work with your OS. You should be able to use 3 LAN cards in the server.
i.dell.com/.../T110II-SpecSheet.pdf
Thanks