This post is more than 5 years old
4 Posts
0
1340
February 28th, 2020 18:00
poweredge T410
Hi, Team
I have a poweredge T410 with intel E5620 on CPU 1. It runs great but I want to upgrade to XEON X5675 on both CPU slots. I purchase two X5675 and I specifically told them to make sure that they work in tandem both have same specs but different S#s. they work separately fine on CPU one on CPU 2 it halts at boot and give me a message in RED letter to move the chip to CPU1. Order Memory from memory net
M393B2G70BH0-YH9
Samsung 1x 16GB DDR3-1333 RDIMM PC3L-10600R Dual Rank x4 Module
Bios ver 1.14.0
I have followed the poweredge T410 technical guide about memory configuration but nothing. Computer will not Boot up.
Help please.
0 events found
No Events found!
DELL-Marco B
Moderator
•
4K Posts
0
March 2nd, 2020 09:00
you can find here the updated list of processor
https://dell.to/32FXYev
page 25
DELL-Marco B
Moderator
•
4K Posts
0
March 2nd, 2020 07:00
Hello,
following this documentation, the XEON X5675 is not supported by this server.
Did you buy this upgrade with a Dell order?
Thanks
https://dell.to/2TdVUas
GaloAlfredo
4 Posts
0
March 2nd, 2020 08:00
Hi, thank you for responding. No I did not buy it from dell. I have the same technical manual but it is old and out date so I though. so basically anything on the X5500 will work in tandem? Table 13 Advance Config and power interface suggest the higher I can go is X5570 Q1G9 2.93 Pmin+10 /4C/3C: 3.20 2C/1C: 3.33/ D-0
or that will not work and just stay with the advice on Table 12
Intel Xeon X5560 2.80GHz, 8M cache, 6.4 GT/s QPI, Turbo, HT
thank you
Galo
GaloAlfredo
4 Posts
0
March 2nd, 2020 16:00
thank you much. that makes perfect cense.
thanks
Galo