Unsolved
1 Rookie
•
1 Message
0
13
R430 Hardware Error
One of our Dell Poweredge R430 has given a hardware error, 'A fatal error was detected on a component at bus 0 device 3 function 0.'
Using the information we have traced the error to 'P2PBridge.Embedded.8-1', but are unable to trace the error any further. Does this point towards any particular PCI slot?
We have re-seated all the expansion cards and the riser, cleared the logs and the server has re-started sucessfully. But it would be good to try and workout what caused the error.
Any suggestions would be much appreciated.
Thanks.
DELL-Chris H
Moderator
Moderator
•
8.5K Posts
0
April 26th, 2024 15:42
Gareth_Bale,
The first thing I would start with would be to ensure that the server is up to date on BIOS, iDrac, and raid controller. I believe the device is the raid controller, but you may want to consider removing the PCI devices and then seeing if the error clears, if so then add them back individually and see if it returns, if so then let me know.
Let me know if this helps.