Unsolved

This post is more than 5 years old

13590

December 30th, 2012 11:00

R610 Freezing / Memory Issues

I have an R610 that's been randomly locking up periodically.  I've run Memtest86 for 24+ hours at a time with no issues.

Today, however, it locked up again, and I got the following error loged in the iDRAC6:  "Multi-bit memory errors detected on a memory device at location DIMM_A2."

The only problem?  There is no memory module in the A2 slot.

All firmwares are up to date, and I've tried fresh OS installs of multiple operating systems to no avail.  It is definitely a hardware issue.  Any thoughts?

 

Thanks

Nick

990 Posts

December 31st, 2012 06:00

What slots do you have memory and what size?  Are you running it as optimized or as Advanced ECC?  

Do you have RDIMM's or UDIMM's?

Thanks,

December 31st, 2012 07:00

I'll power it down this evening and swap things around, unless it locks before then.

Thanks

Nick

December 31st, 2012 07:00

6x4gb RDIMMs in A1, B1, A3, B3, A5, B5 - pretty sure this was how it originally shipped.

Thanks

Nick

990 Posts

December 31st, 2012 07:00

Should be set up as optimizer mode,  using slots A1, A2, A3, B1, B2, B3

Go to the F2 bios, and check the memory mode after confirming the DIMM locations.

Let us know,

0 events found

No Events found!

Top