Unsolved
This post is more than 5 years old
1 Rookie
•
39 Posts
0
1645
January 9th, 2020 09:00
R810 memory configuration
Hello,
i have an R810 and i am running 1 cpu (2 flexmem bridges installed) i have 2 8gb dimms in it and it says its not a valid memory config, would it need another 2 dimms?
No Events found!
Dell-DylanJ
6 Operator
•
2.9K Posts
0
January 9th, 2020 11:00
Hello,
You'll want to first move to a supported processor configuration. This would mean either 1 processor and 1 bridge, 2 processors and 2 bridges, or 4 processors. The documentation indicates that the config you have will allow the server to start, but I think you'd end up opening the door to issues. In addition, the smallest supported configuration I see in the manual is a 4 DIMM configuration.
Page 100 of the owner's manual will get into the details of memory support. Page 102 starts a chart of supported configurations. This section of the manual should be of use to you.
https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-r810_owner%27s%20manual_en-us.pdf