Unsolved
This post is more than 5 years old
1 Rookie
•
2 Posts
0
11209
February 25th, 2008 18:00
Voltage sensor detected a failure value
I receive these error messages about 7 times a day.
The BIOS firmware in this PE 2650 is A21 and the EMS is A2.
This is the only voltage sensor that errors.
Is replacing the power supply the next step?
Event Type: Error
Event Source: Server Administrator
Event Category: Instrumentation Service
Event ID: 1154
Date: 2/24/2008
Time: 5:32:45 PM
User: N/A
Computer: SVPALOALTO
Description:
Voltage sensor detected a failure value
Sensor location: ESM MB 5 Volt
Chassis location: Main System Chassis
Previous state was: OK (Normal)
Voltage sensor value (in Volts): 4.082
No Events found!
snapohead
1.2K Posts
0
February 25th, 2008 23:00
Changing the MB is probably the next step.
Andrew Precht
1 Rookie
•
2 Posts
0
February 26th, 2008 13:00
Thanks for your quick response.
This system is out of warranty; I see a trip to finance in my future.
patteed
51 Posts
0
February 27th, 2008 19:00
Replace the CMOS battery.
snapohead
1.2K Posts
0
February 27th, 2008 20:00
I'd be shocked if replacing the CMOS battery worked.