Boot configuration data for your PCis missing

Question

Hello all,  I am having issue to repair my system on PE R430, windows server 2012 standard 64bit, the system is returning the following error : Your PC need to be repaired The boot configuration data for your PC is missing or contain errors, File:\Boot\BCD Error code: 0xc000000f you will need to use recovery tools on your installation media etc...   so I went to IDRAC then upgrade firmware for Raid controller , that I have Perc H330 Mini , and it's now successfully updated  so I checked the storage status in Dell everything seems to be fine ,  it seems to be OS drive crashed, now when I am booting from OS media from lifecycle controller it's proceeding but if I need to repair windows it's not detecting any drive ! all drives are not available from windows DVD media in order to repair my windows , running windows is server standard 2012 64bit,  I tried this steps from article below which is exactly my issue but unfortunately it didnt work   https://www.dell.com/support/article/in/en/indhs1/sln49038/dell-poweredge-how-the-load-the-perc-drivers-during-windows-2003-2008-or-2012-installation?lang=en#1   as per the article below from rad firmware I should get file name : PERC H330 Adapter (F:\payload\PercSas3.inf)     but the updated firmware has only one file in payload called FW0005i.rom windows server is unable to detect any driver if I click on this    any reply or help would be highly appreciated

Mohdomar · Accepted Answer

Hi Just would like to update it , the issue fixed by getting driver ! while I was downloading firmware not the driver ! not sure why suddenly raid card was unable to load raid driver on system reboot, https://www.dell.com/support/home/us/en/19/drivers/driversdetails?driverid=640n3&oscode=mws80&productcode=poweredge-r430 the issue completely fixed thnx

PowerEdge OS Forum

Was this post helpful?