H810 JBOD and boot issue

Question

Hello i have two issues with our H810 First, i would like to use it in JBOD mode, multiple official documents calims it has this possibility. Trough perccli show all command i can see: Enable JBOD = No also via command to allow JBOD i get root@debian:~# perccli /c0 set jbod=on Controller = 0Status = FailureDescription = NoneDetailed Status :===============-------------------------------------------------------------------Ctrl Status Ctrl_Prop Value ErrMsg                           ErrCd -------------------------------------------------------------------   0 Failed           -     Controller does not support JBOD   255 ------------------------------------------------------------------- root@debian:~# perccli /c0/e91/s20 set jbodController = 0Status = FailureDescription = Set Drive JBOD Failed.Detailed Status :===============-------------------------------------------------Drive       Status  ErrCd ErrMsg                 -------------------------------------------------/c0/e91/s20 Failure   255 Operation not allowed.-------------------------------------------------   So it does not suppor JBOD at all am i right? I googled a lot for this definitive answer and i want to be sure before i say i to my boss. Second: We use this H810 in Supermicro server and i cant get Ctrl + R option during boot, so i cant get to PERC menu. Is there any other way how to get to PERC GUI or mabye some hint how to fix this? Thank you

DELL-Josh Cr · Answer

Hi, It does not have a drive passthrough jbod mode. The closest it does is single drive raid 0. We have not validated it on non Dell servers.

PowerVault

Was this post helpful?