1 Rookie
•
31 Posts
0
71
‘perccli2 /c0 show all' failed to report the disks connected to a H965e/6Gb EMC ESES Enclosure
‘perccli2 /c0 show all' failed to report the disks connected to a H965e/6Gb EMC ESES Enclosure
But the disk number(3) is reported in 'perccli2 show'
-----------------------------------------------------------------------------------------
Ctrl Product Name SASAddress Personality Status PD(s) VD(s) VNOpt EPack
-----------------------------------------------------------------------------------------
0 PERC H965e Adapter 0X5F4EE08063F0FF00 RAID Optimal 3 0 0 Optimal
-----------------------------------------------------------------------------------------
It works well on another 12Gb Enclosure.
this is the result when both 6Gb EMC ESES Enclosure and another 12Gb Enclosure are connected.
EID State DeviceType Slots PD Partner-EID Multipath PS Fans TSs Alms SIM ProdID
------------------------------------------------------------------------------------------
325 OK Enclosure 15 0 - No 0 0 1 0 1 ESES Enclosure
342 OK Enclosure 15 0 - No 0 0 1 0 1 ESES Enclosure
432 OK Enclosure 84 42 522 Yes 2 10 24 1 2 SP-3584-E12EBD
so the 'Partner-EID‘/Multipath of 6Gb EMC ESES Enclosure are wrong?
Is this a firmware issue or perccli issue ?
firmware: lastest from dell (8.4.0.0.18-27)
perccli2: lastest from dell(008.0004.0000.0022)
but perccli/H840 works well with the 6Gb EMC ESES Enclosure.
at least, we need to support this case with single path.
Best regards.
wangyugui
1 Rookie
1 Rookie
•
31 Posts
0
October 30th, 2023 01:22
It failed to work too when connected to SP-3584-E12EBD with single path only.
so it is not a problem only for old 6Gb EMC ESES Enclosure.