Unsolved
1 Rookie
•
20 Posts
0
599
March 5th, 2021 02:00
Amd Rx 480 does not shows screen on Boot Menu!
Hello,
I have Dell T3610 with Xeon E5-2660 v1 and 16GB Ram. I had a NVS Quadro 310 (512mb) running perfectly since I bought the PC. Now I switched to Sapphire Nitro Rx 480 4gb card. The card works fine but the problem is that it only shows screen at Windows Boot but not on the Bios Menu or the Dell Logo does not show up on the boot. I have researched and it seems to be an issue with the Dell Bios settings and not a Card's problem. Plz can someone guide me to fix this Issue. I am using Legacy Boot with Safe Mode off.
Best Regards.
PS: I have latest drivers Radeon 21.2.3 installed
No Events found!
mazzinia_
6 Operator
•
1.5K Posts
•
6.2K Points
0
March 5th, 2021 05:00
Hello,
I "think" that the issue is caused by the bios being in Legacy mode vs being set as UEFI. Videocards from a certain point in time are more meant to be used with (or only with) UEFI, and if they have legacy support, it may be not perfectly made ( depending on the brand ).
Note that if you change to uefi, you will need to reinstall windows ( I know that there's some trick to avoid doing it, but right now i don't remember it )