F6 REQUIRED

>Unless you use the F6 mass storage drivers

windows 7 8 10 wont see any drives.

>https://www.dell.com/support/kbdoc/en-us/000148150/

1. >Driver Installation for RAID Controllers During an OS Reload

2. >Installation of RAID driver with Intel Controller

3. >Installation of RAID driver with LSI Controller

4. >Installation of RAID driver with PERC Array

I guess I should add that I do not have a PERC H310 adapter for these drives they are connected directly into the sata ports.

All drivers are in a cab file.

https://www.dell.com/support/kbdoc/en-us/000121822/precision-t5600-windows-10-driver-pack

http://downloads.dell.com/FOLDER03537942M/1/T5600-WIN10-A01-VFHNM.CAB

You should extract the contents of the cab file onto your USB installer using 7zip.

https://www.7-zip.org/download.html

The section under storage has the F6 drivers for intel, PERC, etc.

Point to that on your flash drive when it cant see drives.

You say load drivers then point to the extracted drivers.

Once installed move the cab file to My documents folder on the target windows machine.

Then install 7zip on that machine

Then right click the cab file in my documents and with 7zip say Extract here

You can then resolve any yellow !  in device manager OFFLINE by telling windows to UPDATE my drivers from my pc not the internet.

I have tried for a couple days now to find the right driver with no success. The only controller I have is a lsi ibm 9212-4i4e. Would this work? and if so where are the drivers for windows 10?