Unsolved
1 Message
0
545
May 4th, 2021 08:00
T3500 RAID Rebuild problem
Hello. RAID 1 disk 0 failed. Disk 1 is OK and bootable. I backed up Disk 1 and put it in the Disk 0 SATA connection. System now boots into showing both disks as Member disks and Disk 0 Bootable BUT it then goes into Press Control-I to go to configuration menu...and just repeats. What can I do to correct this? Thank you very much....Tom
No Events found!
DELL-Cares
Moderator
•
27.7K Posts
•
220 Points
0
May 5th, 2021 02:00
We tried reaching you on a private message asking for the Service Tag number to ascertain the warranty but did not receive a response. Please feel free to reply to the private message whenever you are available.
speedstep
11 Legend
•
47K Posts
0
May 5th, 2021 02:00
You have to format the drive 0 in the drive 0 position. It puts unique signature on each drive from CTRL I bios menu.
You cant clone drive 1 and then put back as drive 0.
Initialize and erase of new drive 0 and Rebuild must be done from the bios menu