Unsolved
This post is more than 5 years old
1 Rookie
•
47 Posts
0
6260
June 1st, 2012 07:00
Error code 1203
I have a Dell All in one Printer Photo 926. My operating system is Windows Vista HomePremium with a 32 bit processor. The error code I have showing is Error 1203.
Can anyone help?
Thank you.
Jerry
No Events found!
PudgyOne
11 Legend
•
30.3K Posts
•
106.6K Points
0
June 1st, 2012 15:00
Jerry,
Error 1203 is a very interesting error code. Here is what I found out about error 1203
It's mean your catridges overflow even from brand new catridges after a several prints or right after you refilled the catridges. Check to see if ink are smeared on the holder where the contact panel with the catridge. I have the same problem which I think lexmark have a proble and overlook.
Solution:
I use the klennex with a few drops of water to dampen and clean off those contact on the holder and my printer work again.
The refill ink work very well if you let it sit 24 hrs. Then before you print anything, you should run aligned the catridges a couple times then run clean catridges a couple times.
Print the test page to see how it's look and way you go.
Be sure not to leave any debris of klennex on those holder contact panel.
Dell Series 9 ink cartridges have a sensor in them that cannot be reset. Article on refilling Dell ink cartridges
Dell Series 9 ink cartridges can be purchased at Staples, Walmart or Dell's Website.
Rick