Unsolved
This post is more than 5 years old
3 Posts
0
1622
February 8th, 2012 14:00
Paper feed problem with 942AIO printer
Printer will not draw paper in properly. When it does start to draw in, it pulls the sheet to the right and does not sufficiently draw into printer.
0 events found
No Events found!
PudgyOne
11 Legend
•
30.3K Posts
•
106.6K Points
0
February 8th, 2012 18:00
yekimflog,
We can first r\try to see if anything is in the papers path.
Unplug the printer from the wall. Also remove the power brick. Take the printer and tilt it and shakes it to see if any paper or object come out. You can also use a vacuum cleaner.
If that does not work, it may be the rollers have flat spots on them because if a roller sits in the same position for an extended persiod of time. then rollers get flat spots on them, which would cause the paper to possibably go in at an angle.
Rick