Unsolved
This post is more than 5 years old
4 Posts
0
7631
February 20th, 2008 09:00
Printer 926 need help!!!
Hi,
I have a big problem with my 926 printer.
I bought it 7 months ago and it works well until last 2 months and I haven't use it for 1 and half month.Then last week I take it out and would like to scan and print out some documents,but it show there is no connection with the printer and I try to diconnect and reconnect,uninstall and reinstall the driver as well.
Finally it works,but it take 10 minutes to scan 1 black and white document and 7 minutes to preview the same documents.
I ordered it to print,it takes around 6 minutes to start printing and takes about 4 minutes to finish printing.
Anyone can help me out,please???
No Events found!
PudgyOne
11 Legend
•
30.3K Posts
•
106.6K Points
0
February 20th, 2008 11:00
Try to re-install your printer this way.
How are you connected to the printer? wired of wireless?
If wired, disconnect your printer. Go to start/programs/Dell printers and un-install your printer.
Restart your computer.
Now go to drivers and downloads/select product/printers/select your printer. Download drivers, Utilities, firmware and Patches.
Install your printer. You'll be prompted when to connect it.
If wireless, fix your network first.
Update the firmware in your wireless router. Manufacturer's website, make & Model needed.
Broadcast SSID(You may want to change this to make it easier to connect)
Use WPA security
Mixed b and g mode(n if available)
Use channels 1, 6 or 11. Most devices work better on these channels.
After router is done, now setup your wireless print server/printer.
If wireless printer server is used, Plug USB cable into computer and print server. Insert the print server disk. Choose Network, then choose print server and follow the instructions.
Now setup the printer.
Now go to drivers and downloads/select product/printers/select your printer. Download drivers, Utilities, firmware and Patches.
Install your printer. Choose Network. Install the drivers.
Everything should now work.
WONG JUN LEONG
4 Posts
0
February 20th, 2008 12:00
Thanks for the replied,however,I have tried this solution,and it works as what I said,delay and slow response.
If I use the xerox function without connect to the laptop,it works as usual,nothing delay or slow response.
I'm using wired connection.