Thanks Rick. I have tried all of your suggestions. When trying to copy (stand alone) the panel shows copy to memory 100% and then freezes. Is this just a glitch or should I now try a factory reset? Thank you so much for helping.
If you cannot use the printer as a stand alone copying machine, then it is something with the printer. I would uplug the printer from the wall, then remove the power brick for 60 seconds.
This resets any error messages the printer is getting. I would also reseat the Dell Series ink cartridges. Not sure if your printer has the same lip the other Dell V Series ink cartridges has but it may help.
There was an issue with Windows 7 and the other Dell V Series printers. Are you using Windows 7?
Also what virus program and firewall are you using?
PudgyOne
9 Legend
•
30.3K Posts
0
July 1st, 2015 06:00
Nanno314,
Printer should be able to copy a document, no computer needed.
To scan a document, the OCR Program needed to be installed from the printer disk.
Articles I have are...
Troubleshooting Setup for the Dell 525w and 725w AIO Inkjet Printers
Troubleshooting Network Problems on the Dell V525w and V725w AIO Inkjet Printers
Troubleshooting Print Quality for the Dell V525w and V725w AIO Inkjet Printers
Rick
Nanno314
3 Posts
0
July 3rd, 2015 09:00
Thanks Rick. I have tried all of your suggestions. When trying to copy (stand alone) the panel shows copy to memory 100% and then freezes. Is this just a glitch or should I now try a factory reset? Thank you so much for helping.
PudgyOne
9 Legend
•
30.3K Posts
0
July 4th, 2015 09:00
Nanno314,
If you cannot use the printer as a stand alone copying machine, then it is something with the printer. I would uplug the printer from the wall, then remove the power brick for 60 seconds.
This resets any error messages the printer is getting. I would also reseat the Dell Series ink cartridges. Not sure if your printer has the same lip the other Dell V Series ink cartridges has but it may help.
There was an issue with Windows 7 and the other Dell V Series printers. Are you using Windows 7?
Also what virus program and firewall are you using?
Rick