Users scripting cli on Idrac9 since v.4.40

Question

Hello Fellows,I have trouble for scripting my 'idrac users' via CLI with the new command cfg.Could someone help me for translate my 'old script' on v.4.40 / 5.00+ ?Old script :config -g cfgUserAdmin -o cfgUserAdminUserName -i 3 TOTOconfig -g cfgUserAdmin -o cfgUserAdminPassword -i 3 TITIconfig -g cfgUserAdmin -i 3 -o cfgUserAdminPrivilege 0x1ffconfig -g cfgUserAdmin -i 3 -o cfgUserAdminIpmiLanPrivilege 4config -g cfgUserAdmin -i 3 -o cfgUserAdminIpmiSerialPrivilege 4config -g cfgUserAdmin -i 3 -o cfgUserAdminSolEnable 1config -g cfgUserAdmin -i 3 -o cfgUserAdminEnable 1I have tried with some others commands as 'set idrac.users.3' or 'set -g cfgUserAdmin.3' but nothing works..Can anyone help me with this script please ? Thanks in advance ,-)

DELL-Shine K · Accepted Answer

You can try below set of commands for same

racadm set idrac.users.3.UserName TOTO

racadm set idrac.users.3.Password TITI

racadm set idrac.users.3.Privilege 0x1ff

racadm set idrac.users.3.IpmiLanPrivilege 4

racadm set idrac.users.3.IpmiSerialPrivilege 4

racadm set idrac.users.3.SolEnable 1

racadm set idrac.users.3.Enable 1

To see the configuration you can run below command

racadm get idrac.users.

racadm get idrac.users.3

User404404 · Answer

Thanks a lot : works like a charm !

BD Nouf · Answer

set idrac.users.4.username User123set idrac.users.4.password P@ssw0rdset idrac.users.4.enable 1set idrac.users.4.Privilege 0x000001ff

Rack Servers

Was this post helpful?