Search Results (11K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Dear All, I have 1 x backup server and 2 x esxi servers attached to ME5024 via FC, and inside ME5024 i attached 3 volumes for all 3 hosts, but when i check in esxi, i only see 2 volumes, any idea ? Keith
Question
•
PowerVault
Community Accepted Solution
Hi everyone, Our SAN fired off two TEMP SENSOR alerts, but said they were UNKNOWN. There were no lights on the rear, but I rebooted one power supply and the errors are now gone. Would I be able to upload the logs to someone for review, I'd rather avoid any surprises. Thanks in advance!
Question
•
PowerVault
Community Accepted Solution
Hi, I was running out of space in my system and decided to buy new disks to increase the current pool with 15 KRPM disks. Since Dell is not selling disks anymore for the SC product line, I decided to give it a try with a third-party vendor. I have installed 3 SAS disks 900 GB 15 KRPM, 2.5",
Question
•
Compellent
Community Accepted Solution
Hi, can anyone help me to resolve issue It appears after moving SC7020 to different datacenter and different vlan&ip on replication/livevolume tab there is "connectivity information" window. So there are 8 connections. 4 UP and 4 down. All down have the same status message: IPC Path is not fo
Question
•
Compellent
Community Accepted Solution
Hi. I have been monitoring the statistics of Front-end Queue depth in my local cluster. But I have not been able to find information related to the maximum number of operations that each port can support. Is there any data or documentation where I can corroborate it?
Question
•
VPLEX
Community Accepted Solution
Closed
Hi Community,Did anyone seen an issue when TOSHIBA PX02SMF080 SSDs all went into communication loss status on Scale-Out? Other drives on the same controller, and disk tray is still functioning, even other type of Toshiba SSDs. It's an MD3060e. Thanks a lot in advance.
Question
•
PowerVault
Community Accepted Solution
Hi guys, I would like to ask for help regarding our Dell storage EMC SCV3020. We have discovered that one of the disks is defective, and we have also found out that the data on the disk has not been evacuated. How can we solve this issue so that we can proceed with the disk replacement?
Question
•
Compellent
Community Accepted Solution
What is the latest version of the EMC Control Center?
Question
•
Storage Resource Management (SRM Suite)
Community Accepted Solution
While investigating customer's SC5020F load via web-console, I found the performance is displayed as weird numbers (look at the screenshots). The most left column looking almost OK, taking into account decimal delimiters. But the average counters have decimal delimiters only... Thus, the system util
Question
•
Compellent
Community Accepted Solution
Folks Anyone could me explain this message "Write cache is currently down...."
Question
•
DELL|EMC Storage Forum
Community Accepted Solution
Unity XT 680 OE version: 5.2.2.0.5.004 try to apply Disk Firmware: UNITY-Drive-Firmware-V20-2022-06-13 I got "Error code: odfu_failed" in upgrade drive firmware wizard. in adminobjs.txt file of service data I have this error for about 77 same disk. vendor ID: TOSHIBAproduct ID: P6V1T
Question
•
Unity
Community Accepted Solution
Hi Team, At what frequency a Unity send telemetry. I mean heartbeat + configuration files + cloud IQ telemetry. Any idea of the volume of the data sent ?
Question
•
Unity
Community Accepted Solution
We have a production Isilon which has been fine for ages, and have setup a Simulator for a safer testing environment. The logic is exactly the same between the two and have just setup the delegated DNS to point to the simulator, however no matter what I do, I am always hit with an Access Denied pop
Question
•
Isilon
Community Accepted Solution
Hello all, I'd like to disable some TCP ports (ex. 139, 445) for security reasons (caught on internal port scan during security audit) I know I can disable it on NAS configuration via web management but, I want to make these ports can't be scanned. I've checked all svc_* commands but
Question
•
Unity
Community Accepted Solution
Hi everyone! I have a Question about Consistency Group because I confused. Storage : Unity 450F / OE : 5.2.1 / Pool : Dynamic I create Consistency Group(test_CG) and create two LUN(CG_LUN-01,02) in Consistency Group. Which of the following is correct?? Is it normal for LUNs included in a Consi
Question
•
Unity
Community Accepted Solution
Hi everyone, I want to expand my Dell EqualLogic PS6100. I am running it with raid 6, and 24 drives and each of them has 600GB and 1 hot spare. I just bought two 1.2TB drives, I want to ask that after I replace them 1 by 1, what will I need to do next? or can someone show me the whole process of thi
Question
•
EqualLogic
Community Accepted Solution
Hi, I have a question about how I can see the power consumption of power supplies in a PowerStore, either through the API or via CLI. Any ideas? Regards
Question
•
DELL|EMC Storage Forum
Community Accepted Solution
Hi @all, we are going to purchase new drives for our unity in order to increase blocks/LUNs size. is this procedure correct ? 1. physically installing new drives. 2. expand the pool size 3 in block menu, selection each LUN then clicking on modify and increase size in "size" line it doesnt aff
Question
•
Unity
Community Accepted Solution
hello all we have a H500 and an A200, plugged into 2 PDU, but we have a data centre UPS issue and I wish to move the power cables into new PDU. Is this straightforward to do? with our VxRail platform I just moved the cables one at a time. does Isilon support this at all? thank
Question
•
Isilon
Community Accepted Solution
Hi Folks Anyone could explain what is mean? What do I need to do? Thank you
Question
•
DELL|EMC Storage Forum