Search Results (11K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Closed
I have a customer that purchased a Powerstore 3000T and was configured as a single appliance without TOR switching. We are now in a situation where they want to add another appliance to this system to create a cluster using a 3200T. I have two questions - 1) Can we mix Gen1 and Gen2 ap
Question
•
PowerStore
Community Accepted Solution
Closed
Hi,Does the vnx simulator still exist?If so where can I download it from? Thank you Greetings
Question
•
VNX
Community Accepted Solution
Closed
I have an old Dell storage with 480G hard drives. What if I repalce the old ones with larger disk, not at the same time? Say I only replace 2*960G at a time. And when I repalce all the old ones, will the total space be expanded or I still get the space with 480G drives? In addition, the old ones are
Question
•
PowerVault
Community Accepted Solution
Closed
Hello.I have SCv3020 storage, and I am tried to setup 5 of hard drives then it gives me error:No disks eligible to be added to this disk folder could be found.I attached screen shot of them. Checked the unassigned reason, and it says: Unlicensed.Please give me some information how can I solve the so
Question
•
Compellent
Community Accepted Solution
Closed
So we're a post production house, using adobe premiere pro. We have a couple of H500 clusters, and also some A200 in those clusters as tier2. Until now we have however not used smartpools to automatically move any data between the tiers, at least not in production. The idea is(like everyone else)
Question
•
Isilon
Community Accepted Solution
Closed
We are using some older VNXe3200 systems still running on version 3.1.5 using the Adobe Flash Player for managing the server. Is it possible to upgrade these systems to an up-to-date version of Unisphere 4? Is there even a way of doing do without loosing the currently stored data? Thanks!
Question
•
VNX
Community Accepted Solution
Closed
Hi All, We are in the process of change the IP Address and VLAN of Unity NAS server but NAS server name will not change. Question is, will it require us to rejoin the NAS server again to AD? Will DNS AD record change automatically when we change the IP in Unity?
Question
•
Unity
Community Accepted Solution
Closed
How to reset admin password on Dell SCV2020 I have ip address and MSC How can I do it
Question
•
Compellent
Community Accepted Solution
Closed
Hi, We have a PROD to DR configured with SyncIQ. Recently I had to pause the policies due to cleanup and directory structure changes. There were many files that needed to be deleted from the Source. I updated the policies and the Target's directory structure is now aligned with what is on the Sourc
Question
•
Isilon
Community Accepted Solution
Closed
Hi all Our company uses a Dell Storage SC4020. It have already 4 10k disks downed when we discovered. We want to repair the storage, but the os of the storage can't be normal after the any controller restart. We have tried to replaced the controllers and a equipment case.&nb
Question
•
Compellent
Community Accepted Solution
Closed
is there any impact to the replication status if i disable the "used as backup only" option do i need to recreate synchronous replication session from Site A to Site B
Question
•
Unity
Community Accepted Solution
Closed
Hi team.After rebooting the cluster it seems that sshd process not running, it's weird because the normal behaviour it would have been get up the process during rebooting but it hasn't. Now connecting throught ssh always fail.Wich the next option to check recomended? Console? Isilon NL400 Onefs v
Question
•
Isilon
Community Accepted Solution
Closed
1. Can tell me do we need to pause or delete the replication first before expanding the volume? 2. Once the replication stop or delete, then do the lun expansion on both site, resume the replication? anyone can tell me the procedure?
Question
•
Unity
Community Accepted Solution
Closed
Hi all, Just to asking. If we changes the IP in the Powerstore storage network configuration, is it all the LUN or datastore that we already present to host will be effected?
Question
•
PowerStore
Community Accepted Solution
Closed
Hi, Does anyone know if its possible to upgrade the base ME4012 that uses the SAS ports to ISCSI controller? Thanks in advance.
Question
•
PowerVault
Community Accepted Solution
Closed
Hello, OneFS: v9.3.0.4CEE: 8.9.8.2Aggregator: Splunk I was able to configure CEE correctly and it's now forwarding Isilon audit logs to Splunk. However, the amount of data is exceedingly large. I would like to limit the log events, either during the capture or when forwarding. For example, we don'
Question
•
Isilon
Community Accepted Solution
Closed
Hi, For SyncIQ is there a way to display the floating value of what has been transferred? If you have a large amount of data the Summary doesn't tell you if the policy is almost finished or its just in the beginning of transferring files. Thanks,
Question
•
Isilon
Community Accepted Solution
Closed
We have recently migrated data to the Isilon. in some instances, we have had the requirement to ensure that a 32bit client can use the NFS export . The customer would like to apply the 32bit setting to all the NFS exports regardless of whether the client is 32bit or a 64bit client . Is there a poten
Question
•
Isilon
Community Accepted Solution
Closed
Hello Everyone, we have two connected RP4Vm clusters install at Main and DR sites version 5.3.3.1 on ESXI & vCenter 7U3, we used the evaluation version till we get the license now we need to uninstall and re-install it again, i checked uninstall procedures and found to uninstall
Question
•
RecoverPoint
Community Accepted Solution
Closed
Hello, I got some drives from a Unity array model SSD Dell/EMC |3.84 TB | SAS 2.5" |MZ-ILT3T8A| I tried to mount them in a Dell R430 server. The disks show up as "blocked". I have updated the firmware on the Raid Perc H730 mini controller but it is still the same. The disks have a block size
Question
•
Unity