This post is more than 5 years old
20 Posts
0
1636
Block only VNX2 test call
I'm assisting a Vblock counterpart on the account and we need Block only VNX2 naviseccli command for email home test.
I am familiar with the NAS command but I can't seem to find one for block only.
NAS and unified: /nas/sbin/nas_connecthome -test -email_1
Block-only: ???
Two other things I noticed: No test button in Unisphere anymore and no way to enter a secondary gateway; is that correct?
Thanks for any help.
Cal-IF4UI
56 Posts
1
October 7th, 2015 12:00
https://support.emc.com/docu41553_VNX-Command-Line-Interface-Reference-for-Block.pdf?language=en_US
Usually this would be a Product Community (Unified) and not ESRS since ESRS is only a pass-through, however I have product knowledge so the Block cli command would be Naviseccli -h ip address of SP A inserttestevent
so inserttestevent is the command the -h is the workstation with CLI on it. You may need to enter username and password in the command.
see link above for command reference for block page 131 is the reference,
Cal