Unsolved
This post is more than 5 years old
4 Posts
0
13674
September 19th, 2005 14:00
Cannot Copy -filename-: Invalid MS-DOS function
I've got a brand new dell and when I try to copy files off of a cd-r in my samsung sc-148a drive I get the following error. Cannot Copy -filename-: Invalid MS-DOS function.
Any ideas on how this can be fixed. I've updated all the drivers and the problem hasn't gone away.
Thanks....
No Events found!


europa303
4.4K Posts
0
September 19th, 2005 14:00
graphicjester
4 Posts
0
September 19th, 2005 15:00
europa303
4.4K Posts
0
September 19th, 2005 16:00
graphicjester
4 Posts
0
September 19th, 2005 18:00
Predator
2 Intern
•
15.3K Posts
0
September 19th, 2005 19:00
Hi GJ,
Just to add with Europa`s, is this the only disc you are having problems with and have you had the chance to possibly check the disc on another PC to see if it works there?
Since the system is brand new, I would open the case and re-seat the IDE cable going from the motherboard to the back of the drive, a loose IDE cable can cause odd issues.
I believe Dell has a firmware update for this drive but one would almost assume considering the time span of introducing this drive into stock and a new 9100, Samsung would be shipping drives with a newer firmware.
Best Regards
God, grant me the senility to forget the people I never liked anyway,
the good fortune to run into the ones I do and the eyesight to tell the
difference.
CD/RW Link
graphicjester
4 Posts
0
September 20th, 2005 12:00
Predator
2 Intern
•
15.3K Posts
0
September 20th, 2005 12:00
Hi G-J,
Since you mentioned replacing it anyway if not a cable issue, do check the Dell firmware, you have nothing to lose.
Good luck
God, grant me the senility to forget the people I never liked anyway,
the good fortune to run into the ones I do and the eyesight to tell the
difference.
CD/RW Link
Message Edited by Predator on 09-20-2005 09:17 AM