Unsolved

This post is more than 5 years old

Closed

1 Rookie

 • 

5 Posts

11293

November 11th, 2005 17:00

cd/dvd combo dimension 4600

i relaced my cd drive with a cd/dvd combo from sony the CRX 360. i have not changed or added anything else.everything is ok apart from the fact that it will not play a dvd.i have used the troubleshooter but that has not helped.as i am no expert can i ask anyone to answer these two questions;
 1.do i need to install any software( i have fusinsoft dvd player and windows player)
 2.is it likely that the player is faulty and needs replacing
 
thanks

10.9K Posts

November 11th, 2005 18:00

To play a DVD, you have to have DVD decoder software installed.  The two
most popular are WinDVD and PowerDVD.  Did one of those come with the
drive?

2 Intern

 • 

15.3K Posts

November 11th, 2005 18:00

Edit: Sorry for the cut Mike, should have refreshed my friend....




Hi Edenman,

I could not find any reference for the 360, found a 320 though...
However Dell ships their systems using the Cable Select jumper feature, so did you set the small plastic jumper on the back of the drive over the pins marked for Cable Select?
Also in order to play DVD`s, you will need some type of decoding software, example PowerDVD or WinDVD.
Windows Media Player require a third party codecs to play DVD`s.


Best Regards




God, grant me the senility to forget the people I never liked anyway,
the good fortune to run into the ones I do
and the eyesight to tell the difference.



CD/RW Link

Message Edited by Predator on 11-11-2005 03:09 PM

1 Rookie

 • 

5 Posts

November 11th, 2005 19:00

thanks skybird .nothing came with the dvd just the unit no leads or software

1 Rookie

 • 

5 Posts

November 11th, 2005 19:00

i will download them and see if it cures the problem  thanks

10.9K Posts

November 11th, 2005 19:00

1 Rookie

 • 

5 Posts

November 11th, 2005 19:00

thanks Predator for your prompt reply.my mistake its a crx 320 it came with no leads or software.i will have a look at the back of the drive unit for the cable select feature.i do not have power dvd or win dvd.i have downloaded fusionsoft dvd player xp from download.com.is this the same sort of software.the dvd does load but before any pictures appear the fusionsoft player closes down

1 Rookie

 • 

5 Posts

November 11th, 2005 21:00

after a few hours on this site i have fixed my dvd problem.thanks to predater and skybird.the fault was that i needed to download windvd.the free trial download has sorted it .now if you could only give me the winning numbers for the lottery !!!!!!!  thanks again
No Events found!

Top