Unsolved
This post is more than 5 years old
1 Message
0
24218
October 8th, 2014 17:00
Problem with RAID configuration in T3610
I have purchased a Dell Precision with Windows 7 and I have upgraded it to Windows 8.1 but after this Windows recognizes three disk separately, the ones needed for the RAID 5. I have searched the drivers in the support section here, there was two drivers specifically for the RAID configuration but I don't know how to install them (LSI MegaRAID 9271 Driver, LSI SAS 2308/9217 Controller Driver). If you can help me with this issue. Thanks and best regards.
No Events found!
theflash1932
11 Legend
•
16.3K Posts
0
October 10th, 2014 21:00
If it is simply a matter of the driver, this is the one you need:
http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=MW17D&fileId=3354507311&osCode=WB64A&productCode=precision-t3610-workstation&languageCode=EN&categoryId=ST
I don't know if that LSI controller supports non-RAID/pass-though, but if so, and it is seeing the 3 individual drives, then you need to go to CTRL-R and configure the RAID 5 first.