Unsolved

This post is more than 5 years old

2 Posts

5542

May 27th, 2007 23:00

Replacing the Hard Drive

I have a Dimension 4700 and my hard drive is failing. The only Hard Drives I see to buy through Dell are refurbished ones for 79.00. I can get a hard drive from a third party, but all I have is the restore disk for my Dimension 4700. What do I need to install on my new third party hard drive in order to be able to use my Dell restore disk? Thank you

11 Legend

 • 

87.5K Posts

 • 

321.3K Points

May 27th, 2007 23:00

As long as you have your XP CD, all you need is a replacement drive. Any standard Serial ATA drive (SATA) will work.

2 Posts

May 28th, 2007 02:00

Thank you for your response, but the XP disk I have came with the PC. It is my understanding that because this is a "Reinstallation Disk" the hard drive I use must have some drivers installed in order for the install disk to work. If I am incorrect, please let me know. Thank you for the advice.

12 Elder

 • 

46K Posts

May 28th, 2007 03:00

payasoron

Besides the Dell XP reinstallation disk, you should have a Drivers & Utilities, Modem, Resource and Applications CD's.

Order for installing drivers in Windows XP.

If you don't have the CD's, you can request them from Dell, Here or, you can download them from Here and burn them to a CD.


If you have XP Home Edition, SATA drivers not required, because the D-4700 is already confingured for SATA operation.

Bev.







===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
No Events found!

Top