Unsolved
This post is more than 5 years old
5 Posts
0
383
September 12th, 2004 18:00
Sony DDU1621 DVD-ROM interface cable wrong
After hours of trouble shooting why the new DVD and old CD drives didn't show up I found that the Sony came with a 40 wire cable that doesn't support CL (cable select). I could have selected master and slave but to be sure I got a new cable (80 wire) and stayed with CL. Both drives were found and installed easily.
No Events found!
Predator
2 Intern
•
15.3K Posts
0
September 12th, 2004 18:00
OuterLimits,
That is what I figured, had basically the same problem on the PC`s I have worked on the past, some of Dell`s cable worked fine, other were short, some were even split.
Best Regards
God, grant me the senility to forget the people I never liked anyway,
the good fortune to run into the ones I do and the eyesight to tell the
difference.
CD/RW Link
Predator
2 Intern
•
15.3K Posts
0
September 12th, 2004 18:00
OuterLimit,
Thanks for the tip on the Sony Cable, any particular reason you did not use the Dell Cable?
Best Regards
God, grant me the senility to forget the people I never liked anyway,
the good fortune to run into the ones I do and the eyesight to tell the
difference.
CD/RW Link
OuterLimit
5 Posts
0
September 12th, 2004 18:00