Start a Conversation

This post is more than 5 years old

Solved!

Go to Solution

4238

August 31st, 2016 07:00

Unity VSA installation Problem

Hello all

Please help me to check my Unity VSA installation.

Today I install Unity VSA by ESXi 6 after finish I login to my Unity VSA by username/password: service/service.

Then I execute command: svc_initial_config -4 "192.168.1.77 255.255.255.0 192.168.1.254"

It show error as below:

Capture.PNG.png

5 Practitioner

 • 

274.2K Posts

August 31st, 2016 13:00

Hi Panha_nhen,

You have run the command correctly but the SP cannot be configured as it is in Service Mode as the output indicates. You could run svc_diag to investigate further. If you are still having issues, please raise the issue with the Support form.

Thanks

633 Posts

September 1st, 2016 09:00

You can find the Unity Support Forum here: Unity

October 11th, 2016 05:00

Hi,

I had the same error.

Please check the VM config of Unity VSA.

I have decrease the Ram from 12 GB to 18 GB and got this error.

Please deploy agin the OVA and DON'T make any change!!!

https://www.emc.com/collateral/white-papers/h15092-emc-unity-unity-vsa.pdf

best regards.

No Events found!

Top