Hi

I want to understand how can I get the value for Enabled Tracks from EMC Symmetrix with Solution Enabler 7.4. Command which we are using is

For XML output :

symcfg -sid 000190300343 list -pool -thin -detail -all -mb -output xml_element_.xml

Otherwise:

symcfg -sid 000190300343 list -pool -thin -detail -all -mb

Earlier with Solution Enabler 7.2, we were directly getting it in the output as below where there is a separate column for Enabled Tracks:

Symmetrix ID: 000190300343

                 S Y M M E T R I X   T H I N   P O O L S                    

----------------------------------------------------------------------

Pool        Dev   Dev             Total  Enabled    Alloc Alloc  Subs

Name        Emul  Config            MBs      MBs      MBs   (%)   (%)

------------ ----- ------------ -------- -------- -------- ----- -----

xt_tp_2way FBA   RAID-5(3+1)   9015281  9015281  7210383    79     0

tp_pool     FBA   2-Way Mir    158290496 158290496  3174536     2   500

hr_thin_r5   FBA   RAID-6(6+2)  65035388 65035388 58531968    90     0

Total                           -------- -------- -------- ----- -----

MBs                             232341168 232341168 68916888    29   341

whereas the output from Sym Array with Solution Enabler 7.4 is as below:

Symmetrix ID: 000194900432

                            S Y M M E T R I X   T H I N   P O O L S                            

------------------------------------------------------------------------------------------------

Pool         Flags Dev               Total     Usable       Free       Used Full Subs     Shared

Name         PTESL Config              MBs        MBs        MBs        MBs  (%)  (%)        MBs

------------ ----- ------------ ---------- ---------- ---------- ---------- ---- ---- ----------

xt_tp_2way    TEFEI RAID-5(3+1)    27045810   27045810   15337922   11707984   43    0          0

tp_pool          TFFEI 2-Way Mir     213107776  213107776   97053736  116061176   54  213          0

hr_thin_r5      TSFEI RAID-6(6+2)   443272416  443272416  224416832  218857776   49    0          0

Total                           ---------- ---------- ---------- ---------- ---- ---- ----------

MBs                              683425984  683425984  336808480  346626944   50   66          0

Legend:

  (P)ool Type:

    S = Snap,  R = Rdfa DSE  T = Thin

  (T)echnology:

    S = SATA, F = Fibre Channel, E = Enterprise Flash Drive, M = Mixed, - = N/A

  Dev (E)mulation:

    F = FBA, A = AS400, 8 = CKD3380, 9 = CKD3390, - = N/A

  (S)tate:

    E = Enabled, D = Disabled, B = Balancing

  Disk (L)ocation:

    I = Internal, X = External, M = Mixed, - = N/A

Please advise how I can get Enabled Tracks with SE-7.4. Also we are getting the output in XML format as below for SE-7.4. Here I do not see any flags PTSEL which would help me understand if state is 'Enabled'. Kindle advise.

- - 000194900432 - FC_disks Internal FC FBA 2-Way Mir 1714814400 1714814400 0 1714814400 0 107177408 107177408 0 107177408 0 104665.4 104665.4 0.0 104665.4 0.0 0 0