D@RE is only enabled at the array level, there is no setting for individual drives. If D@RE shows as enabled in the symcfg list output, then there is nothing else to do.
Also, D@RE needs to be enabled when the array is originally configured and installed. You cannot modify the setting after the VMAX has been configured.
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and questions can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "Symmetrix Support Forum" which would be the most relevant for this question.
SYMCLIGuy
98 Posts
0
August 19th, 2013 06:00
D@RE is only enabled at the array level, there is no setting for individual drives. If D@RE shows as enabled in the symcfg list output, then there is nothing else to do.
Also, D@RE needs to be enabled when the array is originally configured and installed. You cannot modify the setting after the VMAX has been configured.
christopher_ime
4 Operator
•
2K Posts
0
August 16th, 2013 23:00
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and questions can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "Symmetrix Support Forum" which would be the most relevant for this question.