This post is more than 5 years old
41 Posts
0
523
January 27th, 2010 11:00
Second Solution Enabler server not returning same results.
Hi friends, I recently built a second Solution Enabler server console in the DR site for DR purposes. I did a symcfg discover -all and everything seems to be ok exept for one command. When I type symdg -sid XX list, the new Solution Enabler console is not listing anything while the original console is correctly listing all our DGs.
If my memory is correct, there is a "DB" file I could copy from the original SEnabler to the new one to bring this info?
Anybody would know where is that file? And is it the proper way to fix it ?
Regards
0 events found
No Events found!
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
January 27th, 2010 12:00
On source export all DGs to a file and copy to target host
Symdg exportall -f alldgs.list
On target
Symdg importall -f alldgs.list
Give this a shot
This e-mail message (including any attachments) is for the sole use of
the intended recipient(s) and may contain confidential and privileged
information. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution
or copying of this message (including any attachments) is strictly
prohibited.
If you have received this message in error, please contact
the sender by reply e-mail message and destroy all copies of the
original message (including attachments).
nicoroy123_15c2b9
41 Posts
0
January 27th, 2010 12:00
Works like champ!
Thanks!
kensagle
59 Posts
0
January 28th, 2010 11:00
You could look into GNS as well. This will centralize the groups, like DNS for RDF groups
If it is a small shop, it may be overkill.
sagle