Unsolved
This post is more than 5 years old
1 Message
0
2122
October 22nd, 2019 05:00
Virtual console timeout - idrac9
Hello,
Looking to set a timeout for the Virtual console, and I cannot seem to find the setting in the 3.36.36.36 version. It appears to have existed in the 3.31.31.31 version.
DRAC.VirtualConsole.Timeout (Read or Write)
Thanks for your time
No Events found!
Daniel My
12 Elder
•
6.2K Posts
0
October 22nd, 2019 09:00
Hello
I am unable to reproduce this issue. I updated an R440 to 3.36.36.36 and was able to run the command. I tested just getting the value and modifying, both worked for me. Double check your command syntax and step through the command to see where it is failing.
Thanks
user_f04e0f
1 Message
0
November 25th, 2019 15:00
You pasted:
DRAC.VirtualConsole.Timeout
The command should be:
iDRAC.VirtualConsole.Timeout
(note the preceeding lower case "i" - eye). Please verify that wasn't just a cut-n-paste error.
~~shane