This post is more than 5 years old
2 Posts
0
1228
July 25th, 2016 23:00
Network Failover
How does Network Failover works when a SP is faulted for NAS server, should we configure network interfaces from both SP's?
0 events found
No Events found!
This post is more than 5 years old
2 Posts
0
1228
July 25th, 2016 23:00
How does Network Failover works when a SP is faulted for NAS server, should we configure network interfaces from both SP's?
0 events found
Top
Rainer_EMC
6 Operator
•
8.6K Posts
0
July 26th, 2016 03:00
Unity does that automatically - nothing to configure extra
It also makes sure that if you create LACP on one SP the corresponding peer SP ports are also configure with LACP
Rainer_EMC
6 Operator
•
8.6K Posts
1
July 26th, 2016 04:00
See the newly released Unity HA white paper for a broader overview
http://www.emc.com/collateral/white-papers/h15162-emc-unity-high-availability.pdf
pradeep4
2 Posts
0
October 10th, 2016 15:00
I have a quick question, in a unity box that i work on has two Twin-ax IO modules with four ports on each SP ( two ports per IO module), we have aggregated port0 and port 1 on IO module 0 ( connected to cross stacked Cisco switches), and on switch side all four ports are bonded together. Should the ports have port fast capability feature turned on ? and in case of failover the SPB should be able to takeover the NAS server?