Unity VSA - language pack upload failed

Question

Hi all, Have a problem with language pack installation on Unity VSA. Downloaded file from support.emc.com; MD5 checksum is OK. Get following error. How can I fix it?

Rainer_EMC · Accepted Answer

Please check that you are using the correct language pack for VSA

It looks like you are trying to install the one for the physical Unity

File name should be UnityVSA-language-ru_RU-4.0.0.7755166.tgz.bin.gpg

Rainer_EMC · Answer

Hi, I would suggest to try again after clearing your browser cache. If it still doesn’t work then please open a service request with EMC support

sergv1 · Answer

Tried to clear cache. Tried different browser - same error. I work with community edition of Unity VSA, not sure I would be able to open a request for it.

sergv1 · Answer

That worked. Thank you!

richard100030 · Answer

Can I use CLI to install the language pack to Unity VSA?

DELL-Josh Cr · Answer

Hi, It is not listed in the release notes. Page 18. https://dell.to/3buPVdi but you could try the steps on page 44 https://dell.to/3zRtGrk     Let us know if you have any additional questions.

Unity

Was this post helpful?